The authoritative source for research information and outputs is Elsevier Scopus, with researcher profile verification from the Deanship of Scientific Research.
Thermodynamic cycle models are routinely assembled from heterogeneous sources – steam-table lookups, manufacturer data sheets, handbook correlations, and hand-computed preliminary estimates – and an error introduced in any one source (a misread enthalpy, a sign error in a heat balance, a wrong coefficient-of-performance value) can propagate silently through every downstream calculation. Engineers currently guard against this by checking governing equations pairwise, but pairwise checking has a structural blind spot: a set of equations can pass every pairwise comparison and still be globally infeasible as a system. We develop a linear-algebraic diagnostic framework that closes this gap. The governing equations of a steady-state thermodynamic cycle – energy balances over turbines, compressors, boilers, condensers, and expansion devices, together with isentropic-process relations and the coefficient-of-performance definition – form a linear system A x = b whose state vector x collects enthalpies, heat transfer rates, and work quantities at each process node. We show that global inconsistency of this system is equivalent to infeasibility of A x = b , and that infeasibility is always witnessed by a vector in the left nullspace of A that is not orthogonal to b – an algebraically certifiable condition we call a nullspace inconsistency certificate , computable from a single thin SVD and fundamentally inaccessible to pairwise checking. Building on this certificate, we prove that pairwise consistency checks are provably insufficient to detect global thermodynamic inconsistency; we establish existence and uniqueness of a minimum-norm repair vector that returns the right-hand-side data to the nearest feasible point on the constraint manifold; we derive equation-localization weights that rank which governing equation is the primary source of a fault; and we construct a differentiable repair operator whose fixed points correspond to globally self-consistent cycle models. The complete detection-localization-repair pipeline runs in O ( kn 2 ) time via a thin SVD – negligible overhead for cycle models of practical size – and requires no information beyond the equations and data an engineer already has on hand. We demonstrate the framework on the Rankine steam-power cycle and the vapor-compression refrigeration cycle, where it correctly detects, localizes, and corrects hidden inconsistencies – including a 50 kJ kg − 1 enthalpy error in Rankine cycle steam tables and a simultaneous condenser-balance fault with an erroneous COP value in the refrigeration cycle – that pass all pairwise equation checks yet render the global model infeasible. We further discuss how the certificate behaves under measurement and property-estimation uncertainty, and compare the approach against residual-based checking, data-reconciliation, and optimization-based fault detection. The framework requires only the linear (or linearized) governing equations and standard property data already used in routine cycle calculations, making it directly deployable as an auditing layer in existing engineering workflows.
IEEE Journal of Radio Frequency Identification · vol. 10 · 11-19
This study proposes an innovative design approach for an ultra-compact RF rectifier, emphasizing high power conversion efficiency (PCE). The rectifier design employs a dual-branch cell configuration, labeled as Section-1 (S1) and Section-2 (S2), to enhance its performance characteristics. To support biomedical implant applications, these branches are incorporated with a meandered line network, designated as (ML1 and ML2). A radial stub is employed in the S1 structure, while series inductors are additionally connected to S1 and S2 to achieve improved performance characteristics. To improve power delivery performance, the proposed rectifier is specifically optimized for enhanced transfer efficiency within the frequency range of 1.28 GHz to 1.52 GHz. This makes it highly suitable for integration into wireless power transfer systems (WPTs) designed for biomedical implants. Both the simulated (experimental) results confirmed a maximum RF-to-DC PCE of 78.80% (77.7%), achieved at an input powerPinlevel of 4 dBm. Moreover, the proposed design achieves an RF-to-DC conversion efficiency greater than 25% atPinlevel of -20 dBm, thereby demonstrating its suitability for efficient operation under low-power conditions. The rectifier is fabricated on an RT/Duroid substrate, resulting in a compact footprint measuring 7.8 mm by 9.3 mm. A single-series diode (SSrd) configuration is employed to achieve the desired rectification performance. To ensure a wide impedance bandwidth, a sequential matching technique is applied, effectively optimizing the device’s performance throughout the specified frequency spectrum. This work demonstrates the effectiveness of the proposed rectifier in enabling WPT for biomedical implant applications, with particular emphasis on scenarios that demand efficient harvesting of ambient energy.
RF rectifierbiomedical implantswireless power transferpower conversion efficiency
Applications The heat transfer remains a huge problem for industrialists and engineers because many production processes required considerable amount of heat to finish the process successfully. Although, conventional fluids have large scale industrial applications but unable to provide huge amount of heat transfer. Therefore, the study is organized to propose a new ternary heat transfer model using different physical constraints. The key applications area of nanofluid heat transfer are chemical, applied thermal and food processing engineering. Purpose and Methodology: The key purpose of this research is introduce a new ternary nanofluid model using the impressive effects of thermal radiations, surface convection and saddle/nodal points. The results simulated via RKF-45 and discussed in detail. Core findings The strength of Al 2 O 3 nanoparticles form 1%–7% (keeping fixed CuO and Cu as 4% and 6%) and s 1 = −0.2,-0.4,-0.6,-0.8 controlled the fluid movement while s 1 = 0.2,0.4,0.6,0.8 boosted the velocity. Increasing the convection process B i = 0.1,0.2,0.3,0.4 increased the temperature significantly. Further, shear drag is maximum for ternary nanofluid and thermal radiations R d = 0.1,0.2,0.3,0.4 enhances the heat transfer rate.
The study examines the propagation of solitary waves in optical fibers controlled by the Radhakrishnan-Kundu-Lakshmanan model (RKL) equation, which includes a cubic-quintic non-Kerr refractive index. The first step in this study involves utilizing the extended algebraic method to derive solitonic solutions for the given equation. These solutions are subsequently graphically represented for a variety of parameter values. The proposed strategy allows for the discovery of a range of solutions. The controlling model is incorporated into a planar dynamical system via the Gallelian transformation, resulting in the transformation of the governing model. The effects of both the quintic nonlinearity and self-phase modulation on the perturbed and unperturbed systems are explored using the effective potential and related phase portrait. The governing model is thus transformed into a planar dynamical system. Furthermore, this study harnessed a variety of numerical techniques. These methods encompassed time series analysis, phase portraits examination, and meticulous sensitivity inspections. Additionally, we employed a Poincaré section to assess the equation’s responsiveness to external perturbations. The outcomes reveal a fascinating observation: the perturbed system’s behavior shifts from a quasi-periodic state to a chaotic one, contingent upon the amplitude and frequency of the external perturbation. Moreover, we conducted multistability analysis for specific sets of physical parameters, uncovering the equation’s tendency to exhibit multistability in such scenarios.
Thermal mechanism of non-Newtonian nanofluid coated by lubricated power law material has been theoretically worked out. The slip interaction constraints has been proposed for inspecting the thermal transport. The modelling of heat transfer is processed via updated Cattaneo-Christov (CC) expressions. The rheological constraints of nonlinear model are observed by Walter B fluid. The flow phenomenon is governed by stagnation point flow. The differential system is associated to interaction of similarity variables. The solution technique is based on new developed hybrid homotopy analysis scheme. The hybrid homotopy algorithm is developed by combining the shooting technique and traditional HAM. The accuracy regarding the developed scheme is carefully inspected after making comparison of results with earlier claimed studies. The different physical aspect of transport phenomenon is attributed in view of parameters.
Walter's B fluidnanofluidsstagnation point flowCattaneo-Christov heat and mass flux
The researchers are continuously working on nanomaterials and exploring many multidisciplinary applications in thermal engineering, biomedical and industrial systems. In current problem, the analytical simulations for performed for thermos-migration flow of nanofluid subject to the thermal radiation and porous media. The moving wedge endorsed the flow pattern. The heat source effects are also utilized to improves the heat transfer rate. The applications of thermophoresis phenomenon are addressed. The formulated set of expressions are analytically treated with implementation of variational iteration method (VIM). The simulations are verified by making the comparison the numerical date with existing literature. The VIM analytical can effectively tackle the nonlinear coupled flow system effectively. The physical impact for flow regime due to different parameters is highlighted. Moreover, the numerical outcomes are listed for Nusselt number.