Speech disorders affect an individual's ability to generate sounds or utilize the voice appropriately. Neurological, developmental, physical, and trauma may cause speech disorders. Speech impairments influence communication, social interaction, education, and quality of life. Successful intervention entails early and precise diagnosis to allow for prompt treatment of these conditions. However, clinical examinations by speech-language pathologists are time-consuming, subjective, and demand an automated speech disorder detection (SDD) model. Mel-spectrogram images present a visual representation of multiple speech disorders. By classifying Mel-Spectrogram, various speech disorders can be identified. In this study, the authors proposed an image classification-based automated SDD model to classify Mel-Spectrograms to identify multiple speech disorders. Initially, Wavelet Transform (WT) hybridization technique was employed to generate Mel-Spectrogram using the voice samples. A feature extraction approach was developed using an enhanced LEVIT transformer. Finally, the extracted features were classified using an ensemble learning (EL) approach, containing CatBoost and XGBoost as base learners, and Extremely Randomized Tree as a meta learner. To reduce the computational resources, the authors used quantization-aware training (QAT). They employed Shapley Additive Explanations (SHAP) values to offer model interpretability. The proposed model was generalized using Voice ICar fEDerico II (VOICED) and LANNA datasets. The exceptional accuracy of 99.1 with limited parameters of 8.2 million demonstrated the significance of the proposed approach. The proposed model enhances speech disorder classification and offers novel prospects for building accessible, accurate, and efficient diagnostic tools. Researchers may integrate multimodal data to increase the model's use across languages and dialects, refining the proposed model for real-time clinical and telehealth deployment.
Breast cancer remains the most prevalent cancer among women, where accurate and interpretable analysis of pathology images is vital for early diagnosis and personalized treatment planning. However, conventional single-network models fall short in balancing both performance and explainability—Convolutional Neural Networks (CNNs) lack the capacity to capture global contextual information, while Transformers are limited in modeling fine-grained local details. To overcome these challenges and contribute to the advancement of Explainable AI (XAI) in precision cancer diagnosis, this paper proposes MVT-OFML (Multi-View Transformer Online Fusion Mutual Learning), a novel and interpretable classification framework for breast cancer pathology images. MVT-OFML combines ResNet-50 for extracting detailed local features and a multi-view Transformer encoding module for capturing comprehensive global context across multiple perspectives. A key innovation is the Online Fusion Mutual Learning (OFML) mechanism, which enables bidirectional knowledge sharing between the CNN and Transformer branches by aligning both intermediate feature representations and prediction logits. This mutual learning framework enhances performance while also producing interpretable attention maps and feature-level visualizations that reveal the decision-making process of the model—promoting transparency, trust, and clinical usability. Extensive experiments on the BreakHis and BACH datasets demonstrate that MVT-OFML significantly outperforms the strongest baseline models, achieving accuracy improvements of 0.90% and 2.26%, and F 1 -score gains of 4.75% and 3.21%, respectively. By integrating complementary modeling paradigms with explainable learning strategies, MVT-OFML offers a promising AI solution for precise and interpretable breast cancer diagnosis and prognosis, supporting informed decision-making in clinical settings.
breast cancerhistopathological image classificationexplainable AICNN-Transformer hybrid
Abstract Land use and land cover (LULC) analysis is crucial for understanding societal development and assessing changes during the Anthropocene era. Conventional LULC mapping faces challenges in capturing changes under cloud cover and limited ground truth data. To enhance the accuracy and comprehensiveness of the descriptions of LULC changes, this investigation employed a combination of advanced techniques. Specifically, multitemporal 30 m resolution Landsat-8 satellite imagery was utilized, in addition to the cloud computing capabilities of the Google Earth Engine (GEE) platform. Additionally, the study incorporated the random forest (RF) algorithm. This study aimed to generate continuous LULC maps for 2014 and 2020 for the Shrirampur area of Maharashtra, India. A novel multiple composite RF approach based on LULC classification was utilized to generate the final LULC classification maps utilizing the RF-50 and RF-100 tree models. Both RF models utilized seven input bands (B1 to B7) as the dataset for LULC classification. By incorporating these bands, the models were able to influence the spectral information captured by each band to classify the LULC categories accurately. The inclusion of multiple bands enhanced the discrimination capabilities of the classifiers, increasing the comprehensiveness of the assessment of the LULC classes. The analysis indicated that RF-100 exhibited higher training and validation/testing accuracy for 2014 and 2020 (0.99 and 0.79/0.80, respectively). The study further revealed that agricultural land, built-up land, and water bodies have changed adequately and have undergone substantial variation among the LULC classes in the study area. Overall, this research provides novel insights into the application of machine learning (ML) models for LULC mapping and emphasizes the importance of selecting the optimal tree combination for enhancing the accuracy and reliability of LULC maps based on the GEE and different RF tree models. The present investigation further enabled the interpretation of pixel-level LULC interactions while improving image classification accuracy and suggested the best models for the classification of LULC maps through the identification of changes in LULC classes.
land use and land cover changerandom forestLandsat 8Google Earth Engine
IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing · مجلد 17 · 12649-12665
Recent developments and the widespread adoption of remote sensing data (RSD) gave rise to various hyperspectral imaging (HSI) applications. With its detailed spectral information, HSI has been adopted for use in various agriculture-related applications. These applications demand more accurate classification, highlighting the significance of HSI in plant disease detection, crop classification, etc. Despite existing models for RSD-based agricultural applications, such models lack generalizability for plant classification. This task is challenging for the UNet-based architectures due to nonlinear combinations of the pixels in the hyperspectral image, reduced and diverse information of each pixel, and high dimensions. Furthermore, a shortage of labeled data makes achieving high classification accuracy challenging. This study proposes an improved 3-D UNet architecture based on a modified convolutional neural network that uses spatial and spectral information. This approach solves the limitations of existing UNet-based models, which suffer to deal with nonlinear combinations and reduced and diverse information of small pixels. The proposed model employs a semantic segmentation strategy with modified architecture for more accurate classification and segmentation. The studies employ widely recognized benchmark HSI datasets, such as the Indian Pines, Salinas, Pavia University, Honghu, and Xiong'an datasets. These datasets are assessed using average accuracy, overall accuracy, and the Kappa coefficient. The suggested model demonstrated exceptional classification accuracy, achieving 99.60% for the Indian Pines dataset and 99.67% for the Pavia University dataset. The proposed approach is further validated and proven to be superior and robust through comparisons with existing models.
Accurate and rapid diagnosis is essential in the healthcare system for the detection of strokes to mitigate the devastating effects. This study introduces an innovative model for identifying strokes using advanced deep learning (DL) architectures, including SqueezeNet v1.1 and MobileNet V3-Small, feature fusion approaches, and CatBoost models. Using SqueezeNet v1.1 and MobileNet V3-Small, the authors extract meaningful features from computed tomography images that capture local details and global patterns suggesting stroke conditions. Subsequently, they employ feature fusion to combine the complementary representations derived by both architectures, consequently boosting the discriminative capability of the feature set. The Optuna-based CatBoost model is employed to predict stroke using the fused features. The experimental findings show outstanding performance, with a considerable accuracy of 99.1%. The high accuracy level demonstrates our suggested method’s effectiveness in precisely detecting strokes from medical imaging data. Combining DL architectures, feature fusion, and gradient-boosting models offers a promising approach to enhancing stroke diagnosis systems. This can potentially improve patient outcomes and clinical decision-making in stroke treatment.
In this study, the authors proposed a pain identification model using facial expressions. An image extraction technique was developed using the liquid neural network to extract diverse images from the video files. The authors used the DenseNet 201 and MobileNet V3 models to build a hybrid feature engineering technique. They applied quantization aware training to improve the efficiency of the models. The Prkachin and Solomon Pain Intensity score was used for the image classification. They fine-tuned the LightGBM model using the random search algorithm for identifying pain from the facial images. The authors used the Denver Intensity of Spontaneous Facial Action dataset to generalize the proposed model. The performance evaluation outlined the significant performance of the proposed model in identifying pain using the images. In addition, it demands limited computational resources to identify pain. Healthcare and rehabilitation centers can implement the proposed model to provide adequate services to disabled individuals.
Machine learning (ML) is increasingly applied for medical image processing with appropriate learning paradigms. These applications include analyzing images of various organs, such as the brain, lung, eye, etc., to identify sp... | Find, read and cite all the research you need on Tech Science Press
Content Based Image Retrieval (CBIR) plays a significant role in identifying the similarity of images with large datasets. It is identified based on the size, colour, and texture features of the image. But in such conditions, it is complex to determine the features of query images in large datasets and does not show accurate similarity when compared with every image in the retrieval process. In order to perform an efficient similarity of images, a novel Machine Learning (ML) approach Kernelized Radial Basis Auto-Encoder Function Neural Network (Ker_RadBAEFNN) technique is proposed that performs the individual image classification in the retrieval process. Moreover, the neural networks are optimised based on the reinforcement process and perform the extraction process regarding individual images. Further,reinforcement-based optimisation estimates the images in neural networks for undertaking an automatic feature extraction of query images. The performance of the classification process is validated based on MNIST, METU, and COCO datasets that determined the efficiency of the recognition and classification process of image retrieval. The experimental analysis is carried out based on various measures such as accuracy, precision, recall, F1-score, RMSE, and MAPE for the proposed and existing GLCM-ABC, PSO-ANN, IRB-CNN, FAGWO, and OCAM methods. The analysis shows that the performance of the proposed attained better effectiveness with attained accuracy by 98% and diminished for state-of-the-art techniques as 92%, 95%, 94%, 96.8%, as well as 96%, respectively. Compared to existing methods, the accuracy rate of the proposed method is maximised by 1.3%.
International Journal of Imaging Systems and Technology · مجلد 34 (3)
Abstract Rheumatoid arthritis (RA) leads to the destruction, deformation, and loss of function and causes joint damages to 85% of patients. The detection of bone mineral density from traditional x‐ray images consumes more time and it is observer dependent which decreases the evaluation performance when RA is in its early stage. Therefore, it is necessary to develop an observer‐independent computer‐aided automatic analysis system for evaluating JS narrowing. An efficient RA detection system based on feed‐forward neural network is proposed in this article. Initially the dataset is preprocessed to remove blur, redundant data and nonlinearities in RA images using wiener filter in less computation time. The edge boundaries are detected using nonlinear partial differential equation as the texture features of bones has great impact on the system accuracy. The detection strategy is implemented by optimized gray‐level co‐occurrence matrix based on bone image features. The selected features are optimized by genetic algorithm to improve the classification performance. The images are then classified as inflamed and noninflamed by radial basis function neural network. The effectiveness of the proposed classification approach is verified in terms of accuracy, sensitivity, and specificity and compared with the conventional convolutional neural network, artificial neural network, and support vector machine classifiers. Among the several existing techniques, our method found to be much effective with a maximum accuracy of 98.5% as some novel approaches are proposed and also tends to possess more compatible than the present system. Our computerized rheumatoid arteries detection approach will give more precise and flawless consistency rate.
rheumatoid arthritisjoint space narrowingbone mineral densitycomputer-aided diagnosis
IEEE International Conference on Advanced Systems and Emergent Technologies (IC_ASET) · 1-6
One of the leading causes of sickness and mortality in the world is colon cancer, which is definitively diagnosed by histological investigation. While both conventional and current approaches may compare images that may cover cancer areas of different kinds after looking at a large number of images of colon cancer, it remains a major cause of cancer-related mortality. Diagnosing benign from malignant disorders to have several complex elements is the primary challenge for colon histopathologists. This is done by applying techniques from image processing and deep learning (DL). The utilisation of whole-slide photography and digital image processing has made it possible to analyse colon cancer using convolutional neural networks. Proficiency in analysis requires accurate classification of colon tumours. In this paper, an improved system for recognising and classifying colon adenocarcinomas by using an adaptive wiener filter to digital histopathology images and a deep convolutional neural network (DCNN) model shows 94.7% accuracy. In the following step, the image is routed to the areas for segmentation using K-means to accurately define the illness's size and shape. Grey level Concurrent Matric (GLCM) is used for feature extraction and by putting this strategy into practice, doctors can create an automated and best method for identifying different types of colon cancer. This work is implemented using MATLAB.
Abstract Cardiovascular disease (CD) is one of the leading causes of death and disability across the globe. Chest x‐rays (CXR) are crucial in detecting chest and CD. The CXR images present helpful information to the radiologist to identify a disease at an earlier stage. Several convolutional neural network (CNN) models for classifying the CXR images have been established. However, there is a demand for significant improvement in CNN models to generalize them in diverse datasets. In addition, healthcare centers require an effective model for identifying CD with limited resources. Therefore, the authors developed a CNN‐based CD detector using CXR images. The proposed research employs the You Only Look Once, version 7 technique to extract features and DenseNet‐161 for classifying the CXR images into normal and abnormal classes. The authors utilized datasets, including CheXpert and VinDr‐CXR, for the performance evaluation. The findings reveal that the proposed study achieves an accuracy and F1‐measure of 97.9, 97.47, 96.85, and 97.77 for the CheXpert and VinDr‐CXR datasets, respectively. The recommended model required fewer parameters of 5.2 M and less computation time for predicting CD. The study's outcome can assist clinicians in detecting CD at the earliest stage.
Lung cancer is a fatal disease caused by an abnormal proliferation of cells in the lungs. Similarly, chronic kidney disorders affect people worldwide and can lead to renal failure and impaired kidney function. Cyst development, kidney stones, and tumors are frequent diseases impairing kidney function. Since these conditions are generally asymptomatic, early, and accurate identification of lung cancer and renal conditions is necessary to prevent serious complications. Artificial Intelligence plays a vital role in the early detection of lethal diseases. In this paper, we proposed a modified Xception deep neural network-based computer-aided diagnosis model, consisting of transfer learning based image net weights of Xception model and a fine-tuned network for automatic lung and kidney computed tomography multi-class image classification. The proposed model obtained 99.39% accuracy, 99.33% precision, 98% recall, and 98.67% F1-score for lung cancer multi-class classification. Whereas, it attained 100% accuracy, F1 score, recall and precision for kidney disease multi-class classification. Also, the proposed modified Xception model outperformed the original Xception model and the existing methods. Hence, it can serve as a support tool to the radiologists and nephrologists for early detection of lung cancer and chronic kidney disease, respectively.
lung cancer detectionchronic kidney diseasecomputed tomographycomputer-aided diagnosis
Brain tumors in Magnetic resonance image segmentation is challenging research. With the advent of a new era and research into machine learning, tumor detection and segmentation generated significant interest in the research world. This research presents an efficient tumor detection and segmentation technique using an adaptive moving self-organizing map and Fuzzyk-mean clustering (AMSOM-FKM). The proposed method mainly focused on tumor segmentation using extraction of the tumor region. AMSOM is an artificial neural technique whose training is unsupervised. This research utilized the online Kaggle Brats-18 brain tumor dataset. This dataset consisted of 1691 images. The dataset was partitioned into 70% training, 20% testing, and 10% validation. The proposed model was based on various phases: (a) removal of noise, (b) selection of feature attributes, (c) image classification, and (d) tumor segmentation. At first, the MR images were normalized using the Wiener filtering method, and the Gray level co-occurrences matrix (GLCM) was used to extract the relevant feature attributes. The tumor images were separated from non-tumor images using the AMSOM classification approach. At last, the FKM was used to distinguish the tumor region from the surrounding tissue. The proposed AMSOM-FKM technique and existing methods, i.e., Fuzzy-C-means and K-mean (FMFCM), hybrid self-organization mapping-FKM, were implemented over MATLAB and compared based on comparison parameters, i.e., sensitivity, precision, accuracy, and similarity index values. The proposed technique achieved more than 10% better results than existing methods.
International Conference on Emerging Research in Computational Science (ICERCS) · 1-6
Knee Osteoarthritis (KOA) is a common musculoskeletal condition that has a significant worldwide influence on patient well-being. Despite its importance, manually detecting KOA poses tremendous obstacles. Traditional diagnostic methodologies heavily depend on the visual interpretation of radiographic images by certified radiologists. This approach leads to laborious assessments and introduces the potential for discrepancies among observers. Effective manual identification is further complicated by the intricate structure of the KOA grading system, which evaluates joint space narrowing, osteophyte production, and overall degeneration. This paper presents a method for addressing these challenges by integrating the capabilities of Deep Learning (DL) and Machine Learning (ML) models. The dataset utilized in this research was acquired from Kaggle and comprises image samples that have been assigned KOA grades between 0 to 4. The data source is utilized to generate two distinct datasets. The initial dataset is structured as a binary classification task, wherein images are categorized as 'KOA' (grades 2 to 4) or 'healthy' (grades 0 and 1). The second dataset is the same as the original dataset, with five classes for each KOA grade. An important objective of this research is to assess the performance of the model in both binary and multi-class classification. The datasets go through pre-processing phases such as segmentation and normalization before being fed to a CNN (Convolutional Neural Network) model to extract significant features. Following this, the gathered features are utilized to train and validate numerous ML models. The assessment is predicated on several critical metrics that give information about the effectiveness of the model. The results of our study indicate that the Support Vector Machine (SVM) demonstrates outstanding efficiency in the area of binary classification. In contrast, the Random Forest (RF) model performs exceptionally well in multi-class classification, yielding promising outcomes. The suggested method not only addresses the complications of KOA grading, but it also presents a viable technique for early diagnosis and severity categorization, hence assisting clinicians and lowering the diagnostic burden on primary radiologists.
knee osteoarthritisosteoarthritis severity gradingradiographic image classificationjoint space narrowing
Automated fruit classification is a stimulating problem in the fruit growing and retail industrial chain as it assists fruit growers and supermarket owners to recognize variety of fruits and the status of the container or stock to increase business profit and production efficacy. As a result, intelligent systems using machine learning and computer vision approaches were explored for ripeness grading, fruit defect categorization, and identification over the last few years. Recently, deep learning (DL) methods for classifying fruits led to promising performance that effectively extracts the feature and carries out an end-to-end image classification. This paper introduces an Automated Fruit Classification using Hyperparameter Optimized Deep Transfer Learning (AFC-HPODTL) model. The presented AFC-HPODTL model employs contrast enhancement as a pre-processing step which helps to enhance the quality of images. For feature extraction, the Adam optimizer with deep transfer learning-based DenseNet169 model is used in which the Adam optimizer fine-tunes the initial values of the DenseNet169 model. Moreover, a recurrent neural network (RNN) model is utilized for the identification and classification of fruits. At last, the Aquila optimization algorithm (AOA) is exploited for optimal hyperparameter tuning of the RNN model in such a way that the classification performance gets improved. The design of Adam optimizer and AOA-based hyperparameter optimizers for DenseNet and RNN models show the novelty of the work. The performance validation of the presented AFC-HPODTL model is carried out utilizing a benchmark dataset and the outcomes report the promising performance over its recent state-of-the-art approaches.
fruit classificationhyperparameter optimizationrecurrent neural networkstransfer learning