Retraction of “Construction of a binary S-scheme S-g-C 3 N 4 /Co-ZF heterojunction with enhanced spatial charge separation for sunlight-driven photocatalytic performance” by Ali Bahadur et al. , RSC Adv. , 2022, 12 , 23263–23273, https://doi.org/10.1039/D1RA08525E.
Abstract This study investigates the green synthesis of zinc oxide nanoparticles (ZnO NPs) using aqueous extract from Asystasia gangetica ( A. gangetica ) flowers, emphasizing an eco‐friendly and sustainable approach. The synthesized ZnO NPs were characterized using XRD, SEM‐EDS, FT‐IR, and UV–visible spectroscopy. The A. gangetica extract and the ZnO NPs were further evaluated for their antibacterial activity. Characterization of the synthesized nanoparticles using XRD, SEM‐EDS, FT‐IR, and UV–vis, provided useful insights into ZnO NPs' purity, particle size, morphological structure, and high stability. The structure was found to be highly crystalline with an average crystallite size of 17–44 nm in diameter. ZnO photocatalyst had a significant absorption peak at 362 nm, which corresponds to an energy band gap of 3.43 eV, as determined by UV–vis spectral analysis. The ZnO NPs and aqueous extract exhibited significant antibacterial properties against multiple pathogens, with ZnO NPs showing superior efficacy, and statistically significant ( p < 0.001) antibacterial activity when compared to both, the extract and the standard antibiotic, ampicillin. The antibacterial assay revealed that A. gangetica ZnO NPs (100 µg/mL) exhibited enhanced activity with inhibition zones ranging from 5 ± 0.1 mm to 6 ± 0.3 mm, compared to the aqueous extract which ranged from 2 ± 0.02 mm to 5 ± 0.21 mm. Although the standard antibiotic ampicillin (25 µg/mL) showed the highest activity (10 ± 0.18 mm to 12 ± 0.31 mm), the ZnO NPs demonstrated notable antibacterial potential, especially against B. subtilis , P. aeruginosa , and S. aureus . This research serves as a stepping stone for future studies, encouraging the utilization of green synthesis methods for the creation of functional nanoparticles with antibacterial potential against multidrug resistant bacteria. Further studies are warranted to establish the safety, efficiency, and mechanism of action of the ZnO NPs.
Pure and manganese-doped titanium dioxide nanoparticles (MnTiO 2 -NPs) were synthesized by the defect-oriented hydrothermal approach. The synthesized material was then characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDX), and UV–visible spectroscopy (UV–Vis). The agar well diffusion method assessed the antibacterial efficiency of TiO 2 and MnTiO 2 -NPs against E. coli and S. aureus . Zone of inhibition (ZOI) formed by pure TiO 2 was observed as 12 mm and 11.5 mm against E. coli and S. aureus , while for MnTiO 2 -NPs it was observed as 19 mm ( E. coli ) and 21 mm ( S. aureus ). The concentration of synthesized nanoparticles (10 mg/ml, and 20 mg/ml) was used for antibacterial studies. The efficacy of the pure and MnTiO 2 -NPs as an active photocatalyst for the degradation of methylene blue (MB) dye was also assessed using a UV light. It was observed that the photodegradation efficiency of 1 g of MnTiO 2 -NPs was higher than the same amount of pure TiO 2 . The results suggest that the photocatalyst concentration directly impacts the photodegradation of MB dye. The pH value was found to influence the photodegradation of MB dye at higher pH values. Based on the obtained results, MnTiO 2 -NPs were observed as a promising agent for microbial resistance and water remediation.
titanium dioxide nanoparticlesphotocatalysismethylene blue degradationantibacterial activity
Expression of Concern for ‘Construction of a binary S-scheme S-g-C 3 N 4 /Co-ZF heterojunction with enhanced spatial charge separation for sunlight-driven photocatalytic performance’ by Ali Bahadur et al. , RSC Adv. , 2022, 12 , 23263–23273, https://doi.org/10.1039/D1RA08525E.
The current research is about the synthesis of pure nickel sulfide, a series of Te (0, 0.5, 1, 1.5, 2, and 3 wt.%)-doped NiS (Te@NiS) nanoparticles (NPs), and a series of S-g-C3N4 (10, 30, 50, 70, and 80 wt.%)/Te@NiS nanocomposites (NCs), fabricated through a hydrothermal route. XRD and FTIR spectroscopic techniques demonstrated the successful synthesis of NPs and NCs. SEM-EDX images confirmed the flakelike structure and elemental constituents of the fabricated materials. Tauc plots were drawn, to calculate the band gaps of the synthesized samples. Te doping resulted in a significant reduction in the band gap of the NiS NPs. The photocatalytic efficiency of the NPs and NCs was investigated against MB, under sunlight. The results obtained for the photocatalytic activity, showed that 1%Te@NiS nanoparticles have an excellent dye degradation capacity in sunlight. This was made even better by making a series of SGCN/1% Te@NiS nanocomposites with different amounts of S-g-C3N4. When compared to NiS, Te@NiS, SGCN, and 70%SGCN/1%Te@NiS, the 70%SGCN/1%Te@NiS NCs have excellent antifungal ability. The higher impact of SGCN/Te@NiS, may be due to its enhanced ability to disperse and interact with the membranes and intracellular proteins of fungi. The 70%SGCN/1%Te@NiS NCs showed excellent antibacterial and photocatalytic efficiency. Thus, the 70%SGCN/1%Te@NiS NCs might prove fruitful in antibacterial and photocatalytic applications.
The dark brown and white crystals of manganese and tin (Mn2Se3Cl2O7 and SnSe3O4Cl) have been synthesized by solid-state reaction at 450 C. The morphology and the elemental analysis of newly synthesized compounds were studied by SEM and EDX Analysis. SEM analysis reveals that the particle size for Mn2Se3Cl2O7 was found to be 0.2–2.5 μm and for SnSe3O4Cl 2.0–6.0 μm. The EDX studies showed the presence of Mn, Se, O, Cl, and Sn elements. Powdered XRD confirmed the presence of a new phase present in these compounds. Under UV-vis irradiation, the kinetics of methylene blue (MB) degradation catalyzed by produced nanoparticles were monitored. The dye degradation efficiency was estimated, and results reveals that after 150 min of irradiation, almost 75% of the dye was degraded in the presence of Mn compound while 71% degradation was shown by Sn compound. Both composites display antimicrobial activity against Staphylococcus aureus and Escherichia coli with a maximum value of 34.5 mm. The maximum antimicrobial activity shown by Mn-incorporated nanocomposites estimated at 32.5 mm was against Gram-positive bacteria and 26.4 mm against Gram-negative bacteria. Similarly, the maximum antifungal activity shown by Sn incorporated estimated at 33.9 mm was compared to Gram-positive bacteria and 27.8 mm against Gram-negative bacteria.
nanocompositesphotocatalysismethylene blue degradationdye degradation
The synthesis of a photo-catalyst with a narrow bandgap and efficient capability to degrade contaminants in the presence of sunlight is currently challenging but exciting. In this work, an efficient photocatalytic ternary nanocomposite g-C3N4/Cu@CdS has been synthesized successfully by using the co-precipitation method. The synthesized composite was then characterized by SEM, XRD studies, EDX analysis, and ultra-violet-visible (UV-VIS) spectroscopy. The catalytic efficiency for the methylene blue (MB) dye and drug degradation (ciprofloxacin) was assessed by UV-visible absorption spectra. Gram-positive and Gram-negative bacteria were used to test the fabrication composite’s antibacterial properties. Various compositions (1%, 3%, 5%, 7%, and 9%) of/Cu@CdS nanocomposite (NCs) and 20%, 30%, 40%, 50%, and 60% of g-C3N4 NCs were prepared. Results reveal that 5%Cu@CdS and 40%g-C3N45%Cu@CdS showed maximum antibacterial activity and photocatalytic degradation of dye and drug. The X-ray pattern showed no remarkable change in doped and pristine CdS nanoparticles (NPs). The efficient photocatalytic degradation activity of the fabricated ternary nanocomposite against MB dye and ciprofloxacin an antibiotic drug makes it a viable contender for solving environmental problems.