جامعة المعرفة
المصدر المعتمد للمعلومات البحثية والمخرجات هو قاعدة بيانات سكوبس (Elsevier Scopus) مع تدقيق بيانات الباحثين من عمادة البحث العلمي.

Research outputs

المخرجات البحثية

مقالات ومراجعات وأوراق مؤتمرات وفصول كتب، مفهرسة برقم DOI ومربوطة بباحثي الجامعة.

6 مُخرَج نتائج البحث عن «cloud computing»

مقالوصول مغلق202512استشهاد· Semantic Scholar

Consumer Technology in Task Offloading and Edge Resource Allocation: AIoT and Edge Computing for Next-Generation Communication

IEEE Transactions on Consumer Electronics · مجلد 71 (2) · 5356-5365

Artificial Intelligence of Things (AIoT) edge computing has emerged as a critical enabler for consumer technology, easing the load on distribution grid networks through enhanced data transmission and processing capabilities. The Internet of Things (IoT), a modern network paradigm, connects devices using sensors and communication mediums to enable seamless information exchange. However, the limited computational capacity of edge nodes poses challenges in optimizing AIoT edge resources compared to cloud computing. To address this, a cloud-edge three-layer framework for task offloading and edge resource allocation is proposed in the context of consumer technology and distribution grids. This model incorporates random tasks, limited resources, unequal processing power, and high latency requirements. It features two key phases: a resource auction using a multi-round iterative process and compute offloading managed by a Deep Reinforcement Learning (DRL) approach. Enhanced algorithms such as Double DQN and Dueling DQN are integrated into the job offloading process to improve performance. Simulations validate the convergence of the task offloading algorithm and demonstrate that the proposed methods significantly enhance computational efficiency and resource utilization for edge nodes. These advancements offer promising solutions for the dynamic needs of consumer technology and future communication networks.

task offloadingedge resource allocationAIoTedge computing
مقالوصول مفتوح202444استشهاد· Semantic Scholar

Enhancing privacy and security in IoT-based smart grid system using encryption-based fog computing

Alexandria Engineering Journal · مجلد 102 · 66-74

Smart grid represents an advanced and interconnected system that incorporates modern technologies to enhance efficiency, reliability and sustainability. In comparison to the conventional grid, the smart grid (SG) uses many cutting-edge technologies. This research introduces a fog computing encryption-based model for privacy preservation in the smart grid model. By using different advanced technologies, our model addresses the balance between privacy, security, effectiveness and functionality. The model facilitates efficient communication and function inquiry while mitigating challenges posed by massive Internet of Things (IoT) systems in the smart grid environment. Specifically, it tackles the secure data consolidation challenge by employing encryption-based techniques for transmitting private data from smart meters to fog devices. These devices consolidate the data before updating to cloud. Conventional data consolidation approaches for SGs have high computation and communication costs and suffer from high storage requirement. The proposed model resolves these issues; algorithms for data consolidation and extraction of data at fog device and cloud respectively to obtain the secure communication has also been included. The performance of the developed mechanism has been computed against existing data consolidation mechanisms GCEDA (Grouping of Clusters for Efficient Data Aggregation), SPPDA (Secure Privacy-Preserving Data Aggregation) and LPDA (Lightweight Privacy-preserving Data Aggregation) for numerous performance parameters. And the results proves that the performance of developed mechanism with respect to bytes of storage, communication cost and ratio of transmission is better than the existing ones.

smart gridInternet of Thingsfog computingdata encryption
مقالمفتوح (مستودع)202424استشهاد· Semantic Scholar

Federated-Reinforcement Learning-Assisted IoT Consumers System for Kidney Disease Images

IEEE Transactions on Consumer Electronics · مجلد 70 (4) · 7163-7173

The number of people with kidney disease rises every day for many reasons. Many existing machine-learning-enabled mechanisms for processing kidney disease suffer from long delays and consume much more resources during processing. In this paper, the study shows how federated and reinforcement learning schemes can be used to develop the best delay scheme. The scheme must optimize both the internal and external states of reinforcement learning and the federated learning fog cloud network. This work presents the Adaptive Federated Reinforcement Learning-Enabled System (AFRLS) for Internet of Things (IoT) consumers’ kidney disease image processing. The main relationship between IoT consumers and kidney image is that the data is collected from different IoT consumer sources, such as ultrasound and X-rays in healthcare clinics. In healthcare applications, kidney urinary tasks reduce the time it takes to preprocess federated learning datasets for training and testing and run them on different fog and cloud nodes. AFRLS decides the scheduling on other nodes and improves constraints based on the decision tree. Based on the simulation results, AFRLS is a new strategy that reduces the time tasks need to be delayed compared to other machine learning methods used in fog cloud networks. The AFRLS improved the delay among nodes by 55%, the delay among internal states by 40%, and the training and testing delay by 51%.

federated learningreinforcement learningkidney disease diagnosiskidney ultrasound images
مقالمفتوح (مستودع)20245استشهاد· Semantic Scholar

Enhanced slime mould optimization with convolutional BLSTM autoencoder based malware classification in intelligent systems

Expert Systems · مجلد 42 (1)

Abstract Autonomous intelligent systems are artificial intelligence (AI) tools that act autonomously without direct human supervision. Cloud computing (CC) and Internet of Things (IoT) technologies find it challenging to deploy sufficient security defences because of the different structures, storage, and limited computing capabilities that make them more vulnerable to attacks. Security threats against IoT structures, devices, and applications are increasing with the demand for IoT technology. The training data available to AI models may be limited, which could impact their performance and generalizability. Adopting AI solutions in real‐world situations may be impeded by compatibility concerns and the requirement for flawless integration. Malware classification errors can occur due to a lack of contextual knowledge, particularly in cases where benign files behave identically to malicious. Various studies were carried out on detecting IoT malware to evade the menaces posed by malicious code. However, prevailing techniques of IoT malware classification supported particular platforms or demanded complicated methods for attaining higher accuracy. This study introduces an enhanced slime mould optimization with a convolutional BLSTM autoencoder‐based malware classification (ESMO‐CBLSTMAE) system in the IoT cloud platform. The projected ESMO‐CBLSTMAE system focuses on detecting and classifying malware in the IoT cloud platform. To achieve that, the ESMO‐CBLSTMAE algorithm employs a min–max normalization technique for scaling the input dataset. The ESMO‐CBLSTMAE method uses a convolutional bidirectional long short‐term memory autoencoder (CBLSTM‐AE) model for the malware detection process. Lastly, the ESMO method is executed for the optimum hyperparameter tuning of the CBLSTM‐AE technique, which boosts the malware classification results. The experimental analysis of the ESMO‐CBLSTMAE method is tested against a benchmark database, and the outcomes portray the greater efficacy of the ESMO‐CBLSTMAE approach over other existing techniques. The proposed malware classification model achieved an accuracy of 98.57 and F Score of 80.77 and outperformed the existing models.

malware classificationIoT malware detectionhyperparameter optimizationmin-max normalization
مقالوصول مفتوح20227استشهاد· Semantic Scholar

The influence of the Internet of things on pharmaceutical inventory management

International Journal of Data and Network Science · مجلد 7 (1) · 381-390

The primary goal of this research is to examine the influence of the Internet of Things on Pharmaceutical Inventory Management in Jordan. The employees of the pharmaceutical companies in Jordan represent the population of the study. Accordingly, the study instrument was distributed to an appropriate sample of 620 employees of pharmaceutical companies in Jordan; the questionnaires used in the analysis were 432. Structural equation modeling (SEM) was used to test the study hypotheses. The study results indicated that all dimensions of the Internet of Things had an influence on inventory management. The greatest influence was for cloud computing. Based to the study findings, pharmaceutical companies in Jordan should provide high-quality Internet coverage in their offices and stores, as well as to invest in Internet of things technologies that allow the company to remotely monitor and control the physical components of the stores, attract employees with knowledge of modern Internet technologies, and provide the necessary training and development for their employees.

Internet of Thingsdrug inventory managementcloud computingremote monitoring