جامعة المعرفة
المصدر المعتمد للمعلومات البحثية والمخرجات هو قاعدة بيانات سكوبس (Elsevier Scopus) مع تدقيق بيانات الباحثين من عمادة البحث العلمي.

Research outputs

المخرجات البحثية

مقالات ومراجعات وأوراق مؤتمرات وفصول كتب، مفهرسة برقم DOI ومربوطة بباحثي الجامعة.

29 مُخرَج نتائج البحث عن «Dissolution»

مقالمفتوح (مستودع)20223استشهاد· Semantic Scholar

Curcumin Plant for Colorectal Cancer Prediction and Prevention Using In Silico Molecular Analysis; HOT-MELT Extrusion

Evidence-based Complementary and Alternative Medicine · مجلد 2022 · 1-15

The impact of a soluble complex (SC) of curcumin (CuR) synthesized using hot melt (HM) and hot-melt extrusion (HE) technologies on adenocarcinoma cells for the treatment of colorectal cancer by enhancing CuR solubility is investigated in this work. In silico molecular modelling, solubility, drug release, and physicochemical analysis were all part of the phase solubility (PS) study, which featured a novel dyeing test and a central composite design to optimize the best complex (CDD). The optimal HE-SC (1 : 5) enhances solubility (0.8521 ± 0.016 mg·mL−1) and dissolution (91.87 ± 0.208% at 30 min), and it has an ideal stability constant (309 and 377 M−1) at 25 and 37°C and an AL type of isotherm, implying 1 : 1 stoichiometry according to the findings. An intermolecular hydrogen bond that has not undergone any chemical change and has resulted in the complete conversion of the amorphous form aids in the creation of SC. In vitro cytotoxicity was measured at IC50 on the SW480 (72 M·mL−1) and Caco-2 (40 M·mL−1) cells. According to apoptotic studies, apoptosis was responsible for the vast majority of cell death, with necrosis accounting for a small proportion of the total. In vivo toxicity was established using a zebrafish model, and a western blot examination revealed apoptosis at the molecular level. It was argued that the novel formulations developed using HE technology are more significant and effective than existing pure CuR formulations.

curcuminmelt extrusioncolorectal cancerdrug solubility enhancement
مقالمفتوح (مستودع)20221استشهاد· Semantic Scholar

Formulation and Evaluation of Bendamustine Loaded Polymeric Nanoparticle

Indian Journal of Pharmaceutical Education and Research · مجلد 56 (2) · 414-419

Background: Bendamustine-loaded albumin nanoparticles were prepared using different concentrations of Bovine Serum Albumin (BSA) with the goal of delivering the medication to particular cancer cells.Materials and Procedures: The nanoparticles were prepared using simple coacervation technique with increasing concentrations of BSA.The nanoparticles were characterized for process yield, particle size, surface morphology, drug loading capacity (%), particle size distribution (Polydispersity index), in-vitro drug release.The drug release kinetics were studies using different dissolution models.The drug loading capacity of the produced nanoparticles varied from 10.4% to 19%.Formulation (F1) had a mean particle size of approximately 122.4 nm and polydispersivity index of 0.432 across the different compositions.Bendamustine nanoparticles exhibit sustained drug release with almost 51.8% bendamustine released in one day.The drug release kinetics follows Korsmeyer-Peppas model with a Fickian drug release mechanism.The Bendamustine nanoparticles were found to be stable for a month at 40±5C and 75±5% relative humidity.Conclusion: Bendamustine loaded BSA nanoparticles were developed which were found to exhibit a sustained drug release profile.Albumin based Bendamustine nanoparticles have the potential to be explored further for the better management of the cancer chemotherapy with reduced side effects.

bendamustinealbumin nanoparticlesbovine serum albumincoacervation
مقالوصول مفتوح202156استشهاد· Semantic Scholar

Influence of Stabilizer on the Development of Luteolin Nanosuspension for Cutaneous Delivery: An In Vitro and In Vivo Evaluation

Pharmaceutics · مجلد 13 (11) · 1812-1812

Luteolin is a natural drug used as an antioxidant and anti-inflammatory, but unfortunately, it possesses low water solubility, which hinders its delivery via the skin. The main objective of this study was to prepare a luteolin-loaded nanosuspension by the antisolvent precipitation/sonication technique and study the effects of four stabilizers (two nonionic stabilizers, Pluronic F127 and Tween 80, and two polymeric stabilizers, HPMC and alginate) on the physicochemical properties of the prepared formulations. The selected formulations were incorporated into a gel base to evaluate their skin permeability and anti-inflammatory efficacy. The particle size was in the nanosize range (in the range from 468.1 ± 18.6 nm to 1024.8 ± 15.9 nm), while the zeta potential was negative and in the range from -41.7 ± 6.3 mV to -15.3 ± 1.9 mV. In particular, alginate-stabilized nanosuspensions showed the smallest particle size, the highest zeta potential value, and excellent stability due to the dual stabilizing effects (electrostatic and steric effects). The DSC results revealed a less crystalline structure of luteolin in lyophilized NS2 and NS12. Formulations stabilized by 1% Pluronic (NS2) and 2% alginate (NS12) were incorporated into a carbopol 940 gel base and showed good organoleptic character (homogenous with no evidenced phase separation or grittiness). In vitro dissolution studies showed that NS12 enhanced luteolin release rates, indicating the effect of particle size on the drug release pattern. On the other hand, NS2 showed enhanced skin permeability and anti-inflammatory effect in a carrageenan-induced paw edema model, revealing the surface activity role of the stabilizers. In conclusion, while alginate increased the nanosuspension stability by means of dual stabilizing effects, Pluronic F127 improved the skin delivery and pharmacodynamic efficacy of luteolin.

luteolinnanoparticle suspensionsskin deliverystabilizers
مقالوصول مفتوح202129استشهاد· Semantic Scholar

Hepatoprotective Effects of Bioflavonoid Luteolin Using Self-Nanoemulsifying Drug Delivery System

Molecules · مجلد 26 (24) · 7497-7497

Luteolin (LUT) is a natural pharmaceutical compound that is weakly water soluble and has low bioavailability when taken orally. As a result, the goal of this research was to create self-nanoemulsifying drug delivery systems (SNEDDS) for LUT in an attempt to improve its in vitro dissolution and hepatoprotective effects, resulting in increased oral bioavailability. Using the aqueous phase titration approach and the creation of pseudo-ternary phase diagrams with Capryol-PGMC (oil phase), Tween-80 (surfactant), and Transcutol-HP (co-emulsifier), various SNEDDS of LUT were generated. SNEDDS were assessed for droplet size, polydispersity index (PDI), zeta potential (ZP), refractive index (RI), and percent of transmittance (percent T) after undergoing several thermodynamic stability and self-nanoemulsification experiments. When compared to LUT suspension, the developed SNEDDS revealed considerable LUT release from all SNEDDS. Droplet size was 40 nm, PDI was <0.3, ZP was -30.58 mV, RI was 1.40, percent T was >98 percent, and drug release profile was >96 percent in optimized SNEDDS of LUT. For in vivo hepatoprotective testing in rats, optimized SNEDDS was chosen. When compared to LUT suspension, hepatoprotective tests showed that optimized LUT SNEDDS had a substantial hepatoprotective impact. The findings of this investigation suggested that SNEDDS could improve bioflavonoid LUT dissolution rate and therapeutic efficacy.

luteolinself-nanoemulsifying drug delivery systemhepatoprotectionoral bioavailability
مقالوصول مفتوح202124استشهاد· Semantic Scholar

Development and Characterization of Sustained-Released Donepezil Hydrochloride Solid Dispersions Using Hot Melt Extrusion Technology

Pharmaceutics · مجلد 13 (2) · 213-213

The aim of this work was to develop the sustained release formulation of donepezil hydrochloride (DH) using the hot-melt extruded solid dispersion technique via the rational screening of hydrophobic carriers. Hydrophobic carriers with different physicochemical properties such as pH-independent swellability, low-permeability (Eudragit® RS PO (E-RS)), pH-independent non-swellability (ethyl cellulose N7 (EC-N7)), and the presence of lipids (Compritol® 888 ATO (C-888)) with or without pore-forming agents were used to achieve the sustained release profile of DH. Mannitol (MNT) was chosen as the temporary pore-forming agent. The thermal analysis showed that both the drug and C-888 preserved their crystallinity within a solid dispersion. During a dissolution test, MNT could generate pores, and the drug release rate was proportionally correlated to the MNT content. Tailoring of the ratio of C-888 and MNT in the formulations along with an appropriate extrusion temperature profile resulted in the modified release of DH, and a preferable release pattern was obtained under these conditions. C-888 was chosen for the further investigations to obtain tablets with a high integrity. The optimized tablets were compared to the marketed formulation of Aricept® in terms of drug release profiles. The optimized formulation showed the stable and sustained release behavior of extended release profile, which was close to the release behavior of Aricept® with good tablet characteristics. It was concluded that the hot-melt extrusion technique can be utilized for the manufacturing of DH sustained release tablets with improved tablet integrity and characteristics by co-processing the tablet excipient with DH/C-888.

donepezil hydrochloridesustained drug releasemelt extrusionsolid dispersion
مقالمفتوح (مستودع)20218استشهاد· Semantic Scholar

Formulation and in-vitro characterization of fast-disintegrating herbal extract sublingual immunotherapy tablet for peanut-induced allergic asthma

Saudi Journal of Biological Sciences · مجلد 29 (3) · 1283-1297

Background: Allergen immunotherapy (AIT) involves the regimen of gradually incrementing doses of the allergen, thereby inducing desensitization and tolerance. Sublingual Immunotherapy tablets (SLIT-tablets) have been formulated for several allergies and had manifested efficacy for allergic rhinitis and allergic asthma. SLIT promises an alternative method to other routes of AIT enabling patients to self-administer AIT. Objective: The study aimed to formulate fast disintegrating SLIT containing crude peanut extract for peanut-induced allergic asthma. Methods: The crude peanut extract was prepared by a simple extraction method and was subjected to quantitative and qualitative analysis. The extract was also characterised for its physical properties. The preformulation study for the extract and excipients of the tablet was performed using FT-IR spectroscopy and Differential scanning calorimetry. The tablet powder blends were characterised for pre-compression properties. The SLIT tablets were developed by direct compression and the post-compression evaluation was performed. Results: The results of the quantitative and qualitative analysis of extract confirmed the presence of peanut proteins in the extract. The preformulation studies using FT-IR spectroscopy and Differential Scanning Calorimetry revealed that there is no significant interaction between the CPE and excipients. The pre-compression characterisation showed that the powder blends had good flowproperties. Three doses of SLIT tablets were formulated with each dose containing four batches and the tablet of each dose was optimized by studying the effect of varying concentrations of super disintegrants on disintegration time and dissolution rate. The post compression characterization of the tablets was performed and the optimized batch of the three doses with the concentration of 5% crospovidone and 2% croscarmellose sodium showed less wetting time and high-water absorption ratio, shorter disintegration time of 14secs and maximum drug release of >90% within 2-3 min. Conclusion: The results indicated the suitability of formulated SLIT tablets for peanut induced allergic asthma.

sublingual immunotherapypeanut allergyallergic asthmafast disintegrating tablets
مقالوصول مفتوح202084استشهاد· Semantic Scholar

Enhancing Oral Bioavailability of Apigenin Using a Bioactive Self-Nanoemulsifying Drug Delivery System (Bio-SNEDDS): In Vitro, In Vivo and Stability Evaluations

Pharmaceutics · مجلد 12 (8) · 749-749

Apigenin (APG) is a very well-known flavonoid for its anti-inflammatory and anticancer properties. The purpose of this study is to improve the solubility and bioavailability of APG using a stable bioactive self-nanoemulsifying drug delivery system (Bio-SNEDDS). APG was incorporated in an oil phase comprising coconut oil fatty acid, Imwitor 988, Transcutol P, and HCO30 to form a Bio-SNEDDS. This preparation was characterized for morphology, particle size, and transmission electron microscopy (TEM). The APG performance was investigated in terms of loading, precipitation, release and stability tests from the optimal Bio-SNEDDS. An antimicrobial test was performed to investigate the activity of the Bio-SNEDDS against the selected strains. Bioavailability of the Bio-SNEDDS was evaluated using Wister rats against the commercial oral product and the pure drug. The results demonstrated the formation of an efficient nanosized (57 nm) Bio-SNEDDS with a drug loading of 12.50 mg/gm which is around 500-fold higher than free APG. TEM analysis revealed the formation of spherical and homogeneous nanodroplets of less than 60 nm. The dissolution rate was faster than the commercial product and was able to maintain 90% APG in gastro intestinal solution for more than 4 h. A stability study demonstrated that the Bio-SNEDDS is stable at a harsh condition. The in vivo pharmacokinetics parameters of the Bio-SNEDDS formulation in comparison to the pure drug showed a significant increase in maximum concentration (Cmax) and area under the curve (AUC (0–t)) of 105.05% and 91.32%, respectively. Moreover, the antimicrobial study revealed moderate inhibition in the bacterial growth rate. The APG-Bio-SNEDDS could serve as potential carrier aimed at improving the clinical application of APG.

apigeninself-nanoemulsifying drug delivery systemoral bioavailabilityflavonoids
مقالوصول مفتوح202037استشهاد· Semantic Scholar

Formulation of Piperine Ternary Inclusion Complex Using β CD and HPMC: Physicochemical Characterization, Molecular Docking, and Antimicrobial Testing

Processes · مجلد 8 (11) · 1450-1450

The present study was designed to evaluate the effect of hydroxyl propyl methyl cellulose (HPMC) on the complexation efficiency and dissolution of piperine (PPR) and β cyclodextrin (β CD) complex. The binary and ternary inclusion complexes were prepared using solvent evaporation and microwave irradiation methods. The samples were further evaluated for physicochemical evaluation, morphology, antimicrobial, and antioxidant activities. The binary and ternary samples showed high stability constant (Ks) value and complexation efficiency (CE). The dissolution study results revealed marked enhancement in the release of the binary inclusion complex and ternary inclusion complex compared to pure PPR. Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR), and molecular docking results confirm the complex formation. X-ray powder diffractometry (XRD) and scanning electron microscopy (SEM) data revealed modification in the structure of PPR. 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging and antimicrobial results showed enhanced activity in the PPR complex in comparison to pure PPR. In conclusion, a remarkable enhancement in dissolution, antioxidant and antimicrobial activities were attained due to marked improvement in solubility through complexation of PPR with HPMC/β CD.

piperineβ-cyclodextrinhydroxypropyl methylcelluloseternary inclusion complex
مقالوصول مغلق202019استشهاد· Semantic Scholar

Formulation of amorphous ternary solid dispersions of dapagliflozin using PEG 6000 and Poloxamer 188: solid-state characterization, ex vivo study, and molecular simulation assessment

Drug Development and Industrial Pharmacy · مجلد 46 (9) · 1458-1467

The present study was designed to prepare dapagliflozin (DFG) loaded ternary solid dispersions (SDs) using the carrier blend polyethylene glycol 6000 (PEG 6000) and poloxamer 188 (PLX 188). The prepared DFG-SDs were evaluated for solubility study, physicochemical characterization and molecular simulation study. The prepared DFG-SDs showed significant higher solubility and dissolution vis-a-vis pure DFG and DFG physical mixture. The composition DFG:PEG:PLX (1:2.25:0.75 mM) showed the highest solubility (0.476 ± 0.016 mg/mL). The physicochemical characterization confirms the polymorphic transition of DFG from crystalline state to stable amorphous form. The prepared DFG-SDs showed a significantly higher dissolution (64.78 ± 2.34% to 78.41 ± 2.39%) than pure DFG (15.70 ± 3.54%). DFG-SD2 showed a significantly enhanced drug permeation (p<.05) (58.76 ± 4.65 µg/cm) as compared to pure DFG (14.97 ± 3.32 µg/cm). The molecular docking study result revealed a good hydrophobic interaction of DFG with the used carrier due to the lowest energy pose. The interaction occurs between the methylene bridges and the central hydrophobic chain of polyoxypropylene of the polymer. Therefore, DFG-SDs prepared by microwave irradiation method using hydrophilic carrier blend might be a promising strategy for improving the solubility and in vitro dissolution performance.

dapagliflozinternary solid dispersionamorphous solid dispersionspolyethylene glycol 6000
مقالوصول مغلق202016استشهاد· Semantic Scholar

Formulation of Curcumin-β-cyclodextrin-polyvinylpyrrolidone supramolecular inclusion complex: experimental, molecular docking, and preclinical anti-inflammatory assessment

Drug Development and Industrial Pharmacy · مجلد 46 (9) · 1524-1534

This research planned to ameliorate an aqueous solubility and dissolution of Curcumin (CUR) by the formulation of inclusion complex with β-cyclodextrin (β-CD) and polyvinylpyrrolidone (PVP). The phase solubility study was performed to assess the solubility of CUR. The prepared CUR complex assessed for dissolution study, physicochemical evaluation, in-vitro antioxidant activity, molecular modeling, and anti-inflammatory assessment. The pivotal findings of phase-solubility studies demonstrate apparent stability constant (Kc) and complexation efficiency (CE) values for CUR-β-CD and CUR-β-CD-PVP complex was 175.4 M−1, 1.15% and 833.3.2 M−1 and 5.21%, respectively. The characterization results revealed amorphization of crystalline state (CUR) into amorphous state. The maximum drug release found with the ternary CUR complex (F7), i.e. 45.41 ± 3.78% in 6 h study. The chemical shift in the NMR supports that the aromatic ring of CUR is completely complexed inside the β-CD cavity. The antioxidant activity of pure CUR was found to be 58.02 ± 2.21% and CUR ternary complex (F7) showed significantly higher activity to 96.02 ± 2.46%. The in-vivo effect of CUR complex (F7) was also found significantly higher than that of pure CUR. The molecular modeling study depicted that PVP increased the stability of the ternary complex by forming the link between CUR and β-CD. Thus, the ternary inclusion complex of CUR-β-CD-PVP could contribute as an innovative outcome in the enhancement of solubility and in-vivo activity.

curcuminβ-cyclodextrinpolyvinylpyrrolidonesupramolecular inclusion complexes
مقالمفتوح (مستودع)20195استشهاد· Semantic Scholar

Physicochemical, pharmacokinetics, and histological evaluation of new naproxen-quercetin co-lyophilizate to diminish drug-induced gastric irritations in rats

Saudi Pharmaceutical Journal · مجلد 27 (3) · 413-421

Quercetin (QUE) is a flavonoid found in several plants and commonly distributed in edible vegetables and fruits. To evaluate the effect of co-lyophilization of naproxen (NPX) with QUE at different weight ratios on physicochemical characteristics induced gastric irritation, and drug pharmacokinetics. NPX binary systems with QUE in different weight ratios were prepared by freeze-drying alkalinized solutions, and were characterized in terms of physicochemical properties as well as NPX dissolution rate in acidic pH. NPX-induced gastric inflammation studies were carried out in rats for 7 days. The pharmacokinetics of the two formulations were assessed to evaluate the bioavailability of NPX-QUE 1:2 co-lyophilizate. Westar rats were administered oral doses equivalent to 40 mg kg −1 of NPX and blood samples were taken from the retro-orbital vein of rats at 0.5, 1.0, 1.5, 2.0, 3.0, 4.0, 6.0, 8.0 12.0, and 24.0 h post dosing. Co-lyophilization of NPX with QUE enhanced drug dissolution rate in the acidic medium, which was correlated with an increased QUE weight ratio in the co-lyophilizates. Rat stomachs from group V (NPX-QUE 1:2 co-lyophilizate) showed non-significant changes, and biopsies from this group showed no significant leukocyte infiltration and edema in the mucosa. The bioavailability of NPX-QUE 1: 2 co-lyophilizate was similar to the control sample. NPX-QUE 1: 2 co-lyophilizate could be an alternative to NPX in the treatment of arthritis as it minimizes the potential for gastric irritation and enhances safety while retaining the same efficacy and bioavailability.

naproxenquercetinfreeze-dryinggastritis
مقالوصول مفتوح201521استشهاد· Semantic Scholar

Characterization of Celecoxib-Loaded Solid Lipid Nanoparticles Formulated with Tristearin and Softisan 100

Tropical Journal of Pharmaceutical Research · مجلد 14 (2) · 205-205

Purpose: To prepare solid lipid nanoparticles employing softisan 100 (SOFTI) or tristearin (TS) as solid lipid carriers for celecoxib (CXB) to overcome its dissolution challenge.Methods: The solid lipid nanoparticles (SLN) of CXB were prepared by ultrasonic melt-emulsification technique. SLN was characterized using differential scanning calorimetry (DSC), Fourier transform infra spectroscopy (FTIR), as well as for entrapment efficiency, particle size, zeta potential and CXB release.Results: The SLN formulations exhibited high CXB entrapment efficiency (91.6 % for SOFTI and 94.6 % for TS) while mean particle size was 181.0 ± 4.6 and 346.3 ± 3.8 nm for SOFTI and TS, respectively. The DSC thermograms showed the disappearance of CXB peak due to its molecular distribution in the lipid nanoparticles while FTIR spectra revealed physical interaction of CXB with the tested lipids. The tendency of SOFTI to liberate CXB in 24 h was higher than that of TS (55.5 ± 1.07 vs 49.2 ± 2.94 %, p < 0.05). Drug release was by non-Fickian mechanism.Conclusion: Formulation of CXB in SLN using TS or SOFTI produces sustained drug release delivery that can overcome the dissolution limitation of the drug and thus, improve its therapeutic efficacy.Keywords: Celecoxib, Solid lipid nanoparticles, Tristearin, Softisan, Dissolution limitation, Sustained drug release

celecoxibsolid lipid nanoparticlestristearinsustained drug release